Any Compressor
Any Fluid

Fluid Metrics COP can be used on most all compressor brands and sizes, and OEM synthetic lubricants including:

Ingersoll Rand
Ultra Coolant™ , SSR H-1F™

Sullair
Sullube™, SRF1-4000™, Pristine FG™

Gardner Denver
AEON 9000SP, AEON PG, AEON 6000FG

Atlas Copco
Roto-Xtend Duty™, Roto-Food Grade

Quincy
QuinSyn Plus™, QuinSyn PG™, QuinSyn XP™, QuinSyn F™

And many more!
Call if you have questions about your oil.

3 COP Models

COP 10

COP 30

COP 60

Three COP sizes are available for all makes and models oil-injected rotary screw air compressors up to 600 HP.

All COPs utilize interchangeable elements available in two styles for normal and severe, “high acid” applications.

Elements are stacked 1, 2 or 3 high depending on the model.

2 Element Styles

PE-109

 

PE-109 Element

For normal applications, the standard PE-109 element combines both Ion Exchange and Ultra-fine filtration technologies to remove destructive acids and clearance-size solids.

 

 

 

PE-109-RX

PE-109-RX Element

For severe applications, or compressors with acid gas ingestion problems, high temperatures, or a history of short fluid life, the high capacity PE-109-RX resin-only element replaces the filtration media with 50% more Ion Exchange resin for greater acid removal capacity, and longer element life.

About us

Fluid Metrics’ technologies are utilized and endorsed by many of the world’s largest compressor users, and are widely recognized as the best practice in rotary screw air compressor maintenance.

Fluid Metrics, LLC

4514 Chamblee Dunwoody Rd. #252

Dunwoody , GA 30338

Phone: (770) 393-8636

Fax: (770) 393-8631

Email: info@fluidmetrics.com


PROPERTIES TEST METHODS VALUES
Viscosity Index ASTM D2270 153
Viscosity, centistokes – cSt
@ 0° F / ‐17.8° C ASTM D445 690 cSt
@ 100° F / 37.8° C ASTM D445 26.9 cSt
@ 104° F / 40° C ASTM D445 24.9 cSt
@ 210° F / 98.9° C ASTM D445 5.2 cSt
@ 212° F / 100° C ASTM D445 5.3 cSt
Pour Point, ° F / ° C ASTM D97 ‐40 / ‐40
Flash Point, (COC) ° F / ° C ASTM D92 470 / 243
Flash Point, (PMCC) ° F / ° C ASTM D93 410 / 210
Copper Strip Corrosion, 3 hrs. @ 212° F / 100° C ASTM D130 1B
Ferrous Metal Corrosion, Rust Test
Distilled Water ASTM D665A Pass
Synthetic Sea Water ASTM D665B Pass
Foam Tendency (Sequence I, II, III) ASTM D892 0 (Nil)
Density, g/cc @ 25° C ASTM D941 0.98
Total Acid Number (TAN), mg KOH/g ASTM D664 0.18
pH Dow Method 7.9



TYPICAL PROPERTIES TEST METHODS PuroLube XD
Viscosity – cSt @ 40°C ASTM D445 44.4
Viscosity – cSt @ 100°C ASTM D445 7.3
Viscosity Index ASTM D2270 126
Pour Point – °F / °C ASTM D97 -58 / -50
Flash Point – °F / °C ASTM D92 501 / 261
Demulsibility ASTM D1401 Excellent
Foaming Sequences I, II, III ASTM D892 Nil
Specific Gravity ASTM D1298 0.89
Properties subject to change